Mass Loss and Displacement Modeling for Multi-Axis Milling
During the cutting process, material of the workpiece is continuously being removed by the cutting tool, which results in a reduction of mass as well as a displacement in the center of the workpiece mass. When using workpiece sided force sensors, such as table dynamometers, the total mass and the displacement of the center of mass affects the force measurement due to gravitational and inertial effects. The high flexibility of the milling process leads to a complex change of volume and mass and necessitates the consideration of the engagement conditions between tool and workpiece along the tool path in order to estimate changes in mass and center of mass. This paper proposes a method for estimating the mass loss and the displacement of the center of mass during multi-axis milling processes. In this method the tool gets numerically sliced along the tool axis and the workpiece removal for each slice along an arbitrary tool path gets calculated. To validate the mass loss model, experiments in both three-axis milling as well as multi-axis milling processes have been conducted. Since it is difficult to measure the center of mass, validation for the displacement of the center of mass was done by comparison with data extracted from CAD. The results show good agreement between the simulated and measured mass loss using the proposed approach.
PDF Abstract