Active Reconfigurable Intelligent Surface for the Millimeter-Wave Frequency Band: Design and Measurement Results
Reconfigurable intelligent surfaces (RISs) will play a key role to establish reliable low-latency millimeter wave (mmWave) communication links for indoor automation and control applications. In case of a blocked line-of-sight between the base station (BS) and the user equipment (UE), a RIS mounted on a wall or on a ceiling enables a bypass for the radio communication link. In this work, we present an active RIS for the mmWave frequency band. Each RIS element uses a field effect transistor (FET) to amplify the reflected signal and an orthogonal polarization transformation to increase the isolation between impinging and reflected radio wave. By switching the bias voltage at gate and drain of the FET we can establish four states for each RIS element: two reflection states with different phase shifts, an active amplification and an off state. We present results of the active RIS with 37 patch antenna elements arranged in a hexagonal grid for a center frequency of 25.8 GHz. The RIS field patterns obtained by numerical simulations and by empirical measurements in an anechoic chamber are compared. They show a good match and the received power is improved by 12 dB in the active mode of the RIS compared to the reflective mode.
PDF Abstract