A new sulfur bioconversion process development for energy- and space-efficient secondary wastewater treatment

Harvesting organic matter from wastewater is widely applied to maximize energy recovery; however, it limits the applicability of secondary treatment for acceptable effluent discharge into surface water bodies. To turn this bottleneck issue into an opportunity, this study developed oxygen-induced thiosulfatE production duRing sulfATe reductiOn (EARTO) to provide an efficient electron donor for wastewater treatment. Typical pretreated wastewater was synthesized with chemical oxygen demand of 110 mg/L, sulfate of 50 mg S/L, and varying dissolved oxygen (DO) and was fed into a moving-bed biofilm reactor (MBBR). The MBBR was operated continuously with a short hydraulic retention time of 40 min for 349 days. The formation rate of thiosulfate reached 0.12-0.18 g S/(m2.d) with a high produced thiosulfate-S/TdS-S ratio of 38-73% when influent DO was 2.7-3.6 mg/L. The sludge yield was 0.23-0.29 gVSS/gCOD, much lower than it was in conventional activated sludge processes. Then, batch tests and metabolism analysis were conducted to confirm the oxygen effect on thiosulfate formation, characterize the roles of sulfate and microbial activities, and explore the mechanism of oxygen-induced thiosulfate formation in ERATO. Results examined that oxygen supply promoted the thiosulfate-Sproduced/TdS-Sproduced ratio from 4% to 24-26%, demonstrated that sulfate and microbial activities were critical for thiosulfate production, and indicated that oxygen induces thiosulfate formation through two pathways: 1) direct sulfide oxidation, and 2) indirect sulfide oxidation, sulfide is first oxidized to S0 (dominant) which then reacts with sulfite derived from oxygen-regulated biological sulfate reduction. The proposed compact ERATO process, featuring high thiosulfate production and low sludge production, supports space- and energy-efficient secondary wastewater treatment.